If you reload large capacity rifle cartridges, large quantities of pistol cartridges for competition, or use "fluffy" high load density powders like IMR Trail Boss, you know how frustrating it is to have to stop frequently to fill the powder hopper on your Dillon press. Ever wish you could "Super Size" your powder hopper? Now you can! The 2X Powder Hopper Tube� doubles the powder capacity of your Dillon Auto Powder Measure by replacing the original  powder hopper tube with a 14in; powder hopper tube.   The 2X Powder Hopper Tube� is made from high-strength, clear, poylcarbonate tubing that will not stain or discolor from extended contact with most gunpowders.**   Our Precision Powder Baffle� is included and provides a uniform flow of gunpowder to the powder bar, regardless of the powder level in the hopper. The powder baffle is made from 20 gauge aluminum and is water-jet cut to precise dimensions.  Easy Installation! Just empty the powder measure, remove the two screws attaching the original powder hopper and lift off the powder hopper tube. Insert the 2X Powder Hopper Tube� and attach using the original screws. You even get to use your original Dillon powder measure lid.   Compatibility with Dillon Low Powder Sensor If you use a Dillon Low Powder Sensor, it will still fit but will alarm at 50% full unless you modify it with a longer follower rod. Extending the follower rod is easy and inexpensive and instructions are included. These instructions are also available for free download from our "Tips" library for those who want to make their Low Powder Sensor adjustable to alarm at any desired powder level.   Fits all versions of the Dillon Auto Powder Measure that have two screws attaching the Powder Hopper Tube to the powder measure body.?   Included*:  14" Powder Hopper Tube, Precision Powder Baffle� and installation instructions.  * Dillon Powder Measure and Micrometer Powder Bar shown in photo are not included.   ? Older Dillon powder measures with the powder hopper tube held in place by epoxy, and not by 2 screws, require alteration for the 2X Powder Hopper Tube to install. Such alterations may void the Dillon warrantee for your powder measure and is therefore not recommended.  ** Staining can occur with Hodgdon Titegroup� gunpowder. When using Titegroup�, we recommend that you drain the powder measure when not in use.  Features  Doubles powder hopper capacity  Precision Powder Baffle� is included  Utilizes original Dillon powder measure lid  Compatible with Dillon Low Powder Sensor (follower rod must be extended)